Shibuya Improved the HH-1531 handheld core drill for the 2020 Model year with a 7% increase in power to 1,600 Watts. and faster RPM's. this model includes the carrying case. Variable speed control trigger for hand operation. And an On/Off Switch for fix column mount. Revolutionary clutch system Powerful 15 amp motor. Move the water connection to one of the 3-positions for convenience. Includes WCR 5" water swivel for easy slurry control and disposal. Optional Colum and bases are available to convert your drill to Rigg mod sold separately.

DRE4

• Motor: 3 Speed - 19.5 Amp/115 Volt
• Max Bit Size: 6"

DK12

• Motor: DK12 - 14 Amp/115 Volt or 9 Amp/230 Volt - 3 Speed
• Loaded RPM 580/1400/2900
• Thermal Overload Protection

Looking for raw power, mount this powerful little core drill on the optional column and base and unleash its full potential. This little powerhouse will drill a 6-1/2” when mounted. Open the concealed side door and change Rig/Handheld mode switch and Use the Drill in the 2,900 RPM mode and drill up to 3” holes hand-held. GFCI and Slip clutches keep your operators productive and safe while working. Easy to see bubble levels help keep your holes straight and level. New LED indicator shows the load of the machine, allowing you to always drill at maximum pressure. Variable speed handheld trigger for easy bit starting. Move the water connection to one of the 3 convenient locations, water flow/shut off valve included. The RH-1532 can be used Wet or Dry. Keep all your accessories and bit adapters in the included caring case. The RH-1532 is ideal for drilling concrete, reinforced concrete, brick, block, and stone. This heavy-duty wet and dry diamond core drill has high torque output. Lifetime Free Clutch Adjustments** included with the drill just ship the drill back to DITEQ and we will inspect the drill and Adjust the slip clutch.

WEKA DK13

Features & Benefits:

• Thermal overload protection switch
• Side handle for stability
• Dust port and water connection for wet or dry coring
• 5/8”-11 or 1.250”-7 spindle
• Three speed for bits up to 3” (6” mounted)
• Includes carrying case and wrench
• Two leveling bubbles for accurate coring
• Can be used on M-3 & M-4
• Includes: Plastic molded carrying case, side handle, 1/2” BSP male to 5/8-11 male adapter, wrench

Weka DK16

Features & Benefits:

• Electronic overload system
• Two leveling bubbles for accurate coring
• Side handle for stability
• Water connection for wet coring only
• 5/8-11 or 1.250-7 spindle
• Three speed for bits up to 3”
• Includes: Plastic molded carrying case, side handle, 1/2” BSP male to 5/8-11 male adapter, wrench

CB515

• 1800 Watt, 115 volt electric motor
• 2-speed gear box (1400 rpm and 2300 rpm) with slip clutch
• Side handle for stable coring

With a HYCON hydraulic handheld core drill, you will achieve a significant improvement in your profits as there are no costs for setting up a rig. The performance of the core drill allows for drilling of holes up to 4" in all materials - also with reinforcement. Therefore it is only necessary to invest in ONE core drill for many different kinds of jobs. All parts run in oil - a guarantee for long life and low service costs. The tool is totally unaffected by water, dust etc. It will even work underwater. The core drill offers top safety with the built-in ASCO System (Automatic Safety Cut off). The tool automatically cuts off if the core bit jams - no injury to the operator.

With a HYCON hydraulic handheld core drill, you will achieve a significant improvement of your profits as there are no costs for setting up a rig. The performance of the core drill allows for drilling of holes up to ø350 mm in all materials - also with reinforcement.

All parts run in oil - a guarantee for long life and low service costs. The tool is totally unaffected by water, dust etc. It will even work underwater.